Tune Your 2021-2022 F-150 with HP Tuners MPVI2/MPVI2+/MPVI3!
**At this time, Custom Tune Support for the 2021+ F-150 are ONLY available for the MPVI2/MPVI2+/MPVI3 and are not yet available for the RTD/RTD+ and TDN Mobile Support. This will be added at a later time.**
HP Tuners is pleased to now offer an upgrade service for the MG1 PCM found in 2021-2022 Ford F-150 3.5L and 2.7L EcoBoost V6, 3.5L PowerBoost Hybrid V6, and 5.0L V8 trucks. This service enables full functionality of VCM Suite software custom tuning using an MPVI2 or newer generation interface. This one-time upgrade service upgrades your original Ford MG1 PCM requiring you to remove the original PCM from your truck and send it to our headquarters for servicing (see shipping information below). After upgrading, we’ll ship it back to you and you’ll have full access to calibrate, log, and scan via the OBDII port using the latest version of VCM Suite.
Our support packages have been consolidated for easier ordering and support expansion.
Level 1 Support:
- Stock Vehicles
- Cold Air Intakes
- Exhaust Modifications
- Gear Changes
Level 2 Support:
- Level 1 Support PLUS
- Upgraded/Ported Intake Manifold
- Upgraded Intercooler (Ecoboost vehicles)
- Aftermarket Injectors
Level 3 Support:
- Level 2 Support PLUS
- Camshaft Upgrades
- Meth
- E85/Flex Fuel/Fuel System Changes
Level 4 Support - "The All Out Package":
- Level 3 Support PLUS
- Built Engine Calibration
- Engine Swap Vehicles
- Aftermarket Forced Induction
- Nitrous
- Aux Injector Systems
* In full compliance with the Clean Air Act, we cannot alter or disable any CEL arising from the modification of emissions related equipment. This also pertains to “off road use only”.
** Tunes typically take 2-3 business days to complete, fulfilled Monday-Friday except on holidays. In the event that you need your tune request completed sooner, please consider purchasing our Rush Processing Option to ensure expedited response. **
No relearns/reprogramming required (see important notes):
- No IMMO relearn*
- No crank relearn*
*As long as the PCM is installed back into the same vehicle it came from.
Ford MG1 PCM Service:
- PCM (Ford MG1) License for tuning: (4) Universal Credits (sold separately)
- Requires MPVI2, MPVI2+, or MPVI3 interface and the latest version of VCM Suite BETA
Note: Universal Credits for licensing are not included in the cost of any unlock service or purchase. Credits must be purchased separately.
2021+ F-150 2.7L/3.3L/3.5L/5.0L Custom Tunes | HPTuners
Important Notes
How It Works
Shipping Info
Disclaimers
- This service is required to tune 2021-2022 F-150 trucks with the 3.5L EcoBoost/2.7L EcoBoost/3.5L PowerBoost Hybrid V6/5.0L gas engine and MG1CS036 PCM using VCM Editor.
- This is a send-in upgrade service that requires the original PCM to be removed from the vehicle and sent to HP Tuners for servicing.
- Expect 1-3 business days for servicing (not including shipping times).
- PCMs with broken tabs or connectors WILL NOT be accepted for upgrades. No exceptions. Please be careful when removing your PCM.
- This service only upgrades your original PCM for tuning, it does not reprogram your PCM for a different VIN. If you intend to send HP Tuners a spare PCM, it will be returned to you with the same programming as it was received and may not operate in your Ford vehicle without additional programming by a Ford dealer.
- Your MG1 core must be fully functional with no physical or internal damage.
- No other tuning/calibration tools can be used with the upgraded PCM. However, dealers can reflash the PCM once upgraded—this will not relock the PCM.
- VCM Scanner, Dealer Diagnostic, and other diagnostic tools will continue to function normally.